VARIOUS CONFIGURATIONS OF THE TFlinerXL


 

TFlinerXL Project Transport

 

TFlinerXL Reel Lay

 

TFlinerXL Wind Installation

 

 TFLINERXL


 

 The TFlinerXL  is a vessel designed for the specific task of installing foundations for offshore wind turbines.  Various types of foundations can be installed with the vessel.  Foundation pieces are carried as cargo on the open deck of the vessel.  It’s relatively high transit speed guarantees a short turnaround time.

 

The vessel has been designed to do the installation while the vessel is free floating, being kept in position by the DP-2 dynamic positioning system.  As an option, the vessel can be equipped with a 4-point mooring system.  Motions of the vessel are being reduced by an active roll reduction system, while the remaining movements at the crane tip are being compensated by a hydraulic motion compensator.

With added equipment the vessel can be deployed to do installation of monopile foundations of up to 75m in length and about 900t in weight.  The monopiles will be moved over deck by means of rollers and translators.  This equipment is commonly used in the offshore pipelaying industry.  Upending of the monopile will be done using an upending tool, assisted by the main crane.  The shipboard crane has sufficient capacity to lift a large piling hammer.

 

  The vessel’s basic layout with a large open deck, DP capabilities, good transit speed, favorable motion characteristics and large capacity accommodation block make it very suitable for a wide range of tasks.

 


 PRINCIPAL CHARACTERISTICS

 

LENGHT BEAM DEPTH SPEED DEADWEIGHT
105.43m 32.00m 10.00m 14-17 Kn 5300t @ 6.50m

 


TF liner XL installing jacket type foundations

TF liner XL installing monopile foundations

TF liner XL installing transition pieces

 

WIND INSTALLATION VESSEL

In its basic configuration the vessel can do installation of transition pieces of up to 300t.  The main crane has sufficient capacity to lift the transition pieces from the deck onto the monopile. Belowdeck there is ample space for the grouting equipment in a well protected environment.

 

With added gantry’s and winches the vessel can be deployed for the installation of jacket type foundations of up to 600t.  The open deck of the vessel allows for two jackets to be carried side by side.  On the aft part of the main deck there is sufficient space for piling equipment that is needed to anchor the jacket to the seabed.

Larger jackets can be installed over the stern of the vessel, using the same equipment.


 

 

  REEL LAY VESSEL

The TF liner XL is a versatile platform that can be configured for a number of different tasks.

For instance the vessel can be configured for:

  • cable lay
  • reel lay
  • project transport

The vessel’s basic layout with a large open deck, DP capabilities, good transit speed, favorable motion characteristics and large capacity accommodation block make it very suitable for a wide range of tasks.


DOWNLOADS

DATASHEET

TFLINERXL

Download>


 

 

ANIMATION VIDEOS OF THE TFLINERXL


 

Crane Accommodation Vessel DLV-2000

Crane Accommodation Vessel DLV-2000

  Dutch Offshore Innovators BV has prepared a design for a crane/accommodation vessel.

Offshore Construction Vessel 120 M

Offshore Construction Vessel 120 M

  Dutch Offshore Innovators BV has prepared a design for a DP-2/DP-3 class Offshore Construction/Diving Support Vessel.

TFlinerXL

TFlinerXL

  The TF liner XL is a versatile platform that can be configured for a number of different tasks.

Powered by Amazing-Templates.com 2014 - All Rights Reserved.